furniture and decoration, such as table, cabinet, chest, etc.
GREEN COLOR HMR MDF (HIGH MOISTURE RESISTANT MDF)
12mm, 15mm, 18mm
swelling rate in water
less than 6%
E1, E2, E0
MELAMINE FACED MDF
matt, smooth, glossy, high glossy, embossed,ect.
solid or pure color, wood grain color
SOTTED MDF /WALL PANEL MDF
Alum insert, plastic Insert
NATURAL VENEER LAMINATED MDF
ONE SIDE OR TWO SIDES AS REQUEST
beech, oak, maple, walnut,
Expansion ration in thickness
due to water absorption
Modulus of rupture
Modulus of elasticity
Formal Dehyde Emission
MDF colour and material :
100% poplar material with white colour
100% pine material with light yellow colour ,
70% poplar or 70% pine mix 30% hard wood with normal colour
The bottom is strong pallets with one sheet of protected board which is MDF or Particle board and thickness is not less than 15mm. All the goods are wrapped by plastic bags avoiding any moisture. The top and four sides with one sheet of protected board which is not less than 4mm MDF or 8mm Particle board . Then all the goods are strengthened by steel strips. The details as the following pictures
1.Uniform plate density, excellent physics performance; It's close to natural wood but better than natural plank.
2.High strength and good dimensional stability, thickness is2.5mm-30mm,it has been widely used.
3.Good mechanical processing performance, It may use natural wood processing equipment and methods for machining.
4.Flat surface,so It is easy for secondary processing.
MDF raw Material:
MDF Face and Back:
Besides MDF, we can also offer the plywood in various quality , such as plywood, film faced plywood, fancy plywood, etc.